Finns or sharp rocks can quickly cause a hole in your wetsuit. Holes in the neoprene are annoying. As a result, water gets into the wetsuit and the suit no longer keeps you as warm when surfing, triathlon or diving.
It doesn’t have to be a new wetsuit:
Small and large tears in the neoprene can be closed quickly and easily with neoprene adhesive. You also save money on expensive repairs.
The best neoprene adhesive 2024?
Content
In a hurry? Our favorite neoprene adhesive:
- Short drying time of 1 hour
- Ideal for neoprene
- Good price-performance ratio
- Ideal for seams and edges
Neoprene adhesive Checklist: These features are important in the test
- What is it suitable for? Neoprene glue seals tears and small holes in the wetsuit.
- How long does it take to dry? The adhesive needs time to dry, so the wetsuit should not be used for 1-2 days. .
- What color? Some products are transparent and barely visible on the neoprene.
Also interesting: The most popular wetsuits 2024.
These are the top 3 neoprene adhesives reviewed at 2024
1. McNett – Black Witch
Advantages
- Short drying time of 1 hour
- Ideal for neoprene
- Good price-performance ratio
- Ideal for seams and edges
Disadvantages
- No accessories included
Summary
The Black Witch is the classic neoprene adhesive and is available in most surf stores in Europe. It is ideal for the material and has a short drying time of approx. 1 hour.
This black neoprene adhesive is best suited for tears at seams and edges. It is less suitable for repairing cracks under the shoulders. The Black Witch has the best price-performance ratio in this selection.
The scope of delivery does not include a brush or neoprene patch. A brush helps to spread the glue evenly, in an emergency a stick or piece of plastic can also be used.
Conclusion
Proven neoprene adhesive without accessories.
Product details
Drying time: 1 hour | Content: 28 g
Customer ratings
The majority of customers are completely satisfied with this neoprene adhesive. They state that the hole in the neoprene could be glued without any problems.
Around 5% are neutral about the product, while 3% rate the product as poor and inadequate.
Some customers state that the adhesive becomes too hard and crumbly and that they have not succeeded in repairing it.
FAQ
2. M2 Neoprene – Repair Set
Advantages
- Set contains everything for neoprene repair
- Ideal for neoprene
- Fast gluing
Disadvantages
- Low viscosity
Summary
This set contains everything you need to repair neoprene. A tube of glue, a brush and a neoprene patch to be prepared for all eventualities.
The neoprene adhesive is perfect for neoprene and sticks very quickly. The exact speed is not specified by the manufacturer. According to customers, the adhesive must dry before the edges are pressed together.
The consistency of the adhesive is thin compared to other neoprene adhesives. This is not necessarily a disadvantage, but some people prefer a slightly firmer adhesive that does not run as much.
Conclusion
Neoprene adhesive set that contains everything you need for a repair.
Product details
Drying time: N/A | Size: Contents 35 g
Customer ratings
Customers are convinced by this product and say that it does exactly what it is supposed to do. Namely to close the tear in the wetsuit.
Around 6% are neutral about the product, while 0% rate the product as poor and inadequate.
Some customers were not satisfied with the end result of their repair. One customer stated that the brush was unusable after a repair.
FAQ
3. McNett Aquasure
Advantages
- Ideal for neoprene
- Dries transparent
- Also suitable for shoes
Disadvantages
- Expensive
- No accessories included
- Must be stored in the freezer compartment
Summary
This adhesive also comes from the manufacturer McNett and is mainly used by divers, but it is also suitable for repairing hiking boots. A particular advantage is that it dries transparently, leaving hardly a trace on the material.
The adhesive is the most expensive in this selection with a price of just under 12 $. There are no accessories included that would justify the price.
What many people don’t know:
The glue hardens on contact with air, so it should be stored in a bag in the freezer compartment.
Conclusion
Good, but price-intensive neoprene adhesive.
Product details
Drying time: N/A | Content: 28 ml
Customer ratings
Customers are very satisfied with this product and use it not only for wetsuits, but also for waders and hiking boots.
Around 5% are neutral about the product, while 2% rate the product as poor and inadequate.
Some customers are dissatisfied with the handling of the adhesive or the result of the repair.
FAQ
More articles you might find interesting:
- Wetsuits
- Neoprene gloves
- wetsuit pants
- Neoprene socks
- Swimming cap
- waterproof Mp3 player
- Swimming backpacks
Boards that mean the world:
Bestsellers: The most popular neoprene adhesives
(**Last update 2024-11-18)
Buy neoprene adhesive:
How to make the right decision
Even a small hole in your wetsuit can put an abrupt end to your surfing trip. Neoprene adhesive provides a remedy in such situations.
It gets even better:
BeyondSurfing has researched for you which adhesive is the right one and what else there is to know about neoprene adhesives. You will also find instructions in the buying guide that you can use to repair your wetsuit yourself in just a few steps.
What you need to consider when buying a neoprene adhesive
When looking for the best neoprene adhesive, you should definitely pay attention to the following features and properties:
- Type of adhesive
- Size of the damage
- Drying time
- Heat resistance
- Visibility
The right type of adhesive for neoprene
Superglue, epoxy glue/resin and urethane glue could all theoretically be used for neoprene. But which adhesive is best? Quite simply, the most suitable is neoprene adhesive.
If there is no other option, a different adhesive can also be used. Neoprene adhesive has the necessary flexibility, is waterproof and heat-resistant. It therefore has the best properties to optimally bond with the material.
Neoprene adhesive: How much damage is there?
Before the wetsuit is repaired, the damage must be assessed. Is it just a small tear or a large hole in the neoprene?
For minor damage:
Neoprene adhesive is perfectly adequate here. Apply neoprene adhesive to both edges of the tear and then press them together. This closes the hole. You can find out more here.
For major damage:
The question is: can I repair it myself or does the wetsuit need to be repaired? Even if the damage appears extensive at first glance, it can often be repaired yourself with a little effort.
Larger holes or tears can often be repaired using a needle and thread. If the two edges of the tear cannot be pressed together, a piece of neoprene must be glued over the hole. You can find out how this works here.
Many wetsuits have a collar that is slipped over the head. If this or the zipper is damaged, it is better to take the wetsuit to a specialist for repair.
The drying time of neoprene adhesive
A hole in the wetsuit is particularly annoying on a short trip, as you may not be able to use the wetsuit for 1-2 days. This is because the neoprene must be completely dry before gluing.
A question of patience:
The wetsuit should be ready for use again as quickly as possible, but it is worth being patient. If the neoprene is not glued properly, the process may have to be repeated.
How long does the adhesive have to dry?
It depends on the manufacturer. Some adhesives only need to dry for 20 minutes, while others need an hour or more. The longer the glue can dry, the better the end result.
Heat resistance
The neoprene may be exposed to high temperatures. Because sometimes the wetsuit does need to be dried in the sun, even if this is not recommended. It should also be mentioned that the neoprene adhesive should be waterproof, but this is usually the case with adhesives that are sold as neoprene adhesives.
Visibility
Even if the visual appearance is not the top priority, an attractive result is the aim of every repair. If the adhesive is applied properly, the glued area is barely visible, but the repair requires some practice and dexterity.
Be careful when applying the adhesive and do not apply more adhesive than necessary. This means that no unsightly stains or adhesive residue are left behind. Excess material can be scraped off with a spatula or stick. An old cloth or towel can also be used for this purpose.
What if the neoprene adhesive is not enough?
If the tear is very large or the hole is too big to fix the sides together, a needle and thread are used. It may even be necessary to use a piece of neoprene to seal the hole.
Needle and thread:
Here, glue is first applied to both sides and then glued together. This step can also be skipped, as otherwise glue will remain on the hands without gloves.
The two sides are then simply sewn together and then sealed with another layer of neoprene adhesive on the inside and outside.
Neoprene on neoprene:
If the damage is a large hole, it is advisable to use a piece of neoprene to repair the tear. A piece of neoprene is placed over the hole and glued in place, or sewn on and glued at the same time.
Well-known brands and manufacturers
The best-known and most popular surf wear brands & manufacturers include
McNett, Aqua, M2, Scuba Pro, Cressi
Neoprene adhesive in Consumer Reports and Öko-Test
Unfortunately, there are no neoprene adhesive tests available from Consumer Reports or Öko-Test.
FAQ: Frequently asked questions and answers about neoprene adhesive
What is neoprene adhesive?
Which neoprene adhesive is the best?
Where can I buy neoprene adhesive?
How long does the adhesive have to dry?
How to use neoprene adhesive correctly?
Repair your wetsuit with these 8 tips:
Clean and remove dirt:
The neoprene must be cleaned well. All soiling such as sand or salt must be removed. First use fresh water, if this is not sufficient, the material can also be cleaned with alcohol.
Drying:
The wetsuit must be dried properly. And not just on the surface, the neoprene should be completely dry. This may take 24 hours or more.
Turn over:
Turn the wetsuit or neoprene shoe inside out.
Preparation:
Now apply a thin layer of glue to both sides of the crack, a brush is particularly suitable for this. The two sides are not yet pressed together.
Drying (again):
Don’t worry, the glue only needs to dry for an hour at most.
Bonding:
Now apply another layer of adhesive to the crack. The two edges of the crack are then pressed together as straight as possible.
Hold on tight:
Press both edges together by hand for a few minutes. Then put the wetsuit to one side. Fix or weigh down the glued area.
Drying (for the last time, I promise):
Yes, it is time-consuming, but the end result is worth it. We recommend allowing the neoprene adhesive to dry for at least 6 hours, preferably 24 hours. Meanwhile, a second layer of adhesive can be applied to the inside and outside to achieve the best possible end result.
Good to know: These instructions apply equally to wetsuits, wetsuits and diving shoes.
How do you care for neoprene properly so that it lasts longer?
Washing neoprene correctly
- Rinse the wetsuit inside and out with fresh water after each use. Salt water attacks the material and makes it porous.
- If possible, wash the wetsuit with a wetsuit cleaner to remove unpleasant odors.
- Dry the wetsuit after washing. More on this in the next section.
Drying neoprene properly
The wetsuit should always be dried after washing. The wetsuit dries best when it is also turned inside out. What’s more, the inside dries first and you don’t have to struggle into a wet wetsuit.
The wetsuit should then be hung over a hanger so that it can dry as quickly as possible. However, the neoprene should not be exposed to direct sunlight. Over time, the UV rays damage the material and make it porous.
What is the harm of neoprene?
Of course, there are also a few things that are not good for the wetsuit. You should avoid these three things when handling your wetsuit.
- Put the wetsuit in the washing machine or tumble dryer.
- Hot temperatures. The wetsuit should be stored at room temperature if possible.
- Urinating in a wetsuit! Sometimes it cannot be prevented, but should be kept to a minimum. Otherwise the neoprene will develop an unpleasant odor.
Conclusion: The most popular neoprene adhesives reviewed
As you can see, you can easily repair holes and tears in the neoprene yourself. This saves time and, above all, money, as repairs by a specialist are more expensive than a tube of neoprene adhesive. A hole can develop quickly, which is why a tube of neoprene glue is a must on your next surf trip or diving vacation.
| # | Preview | Product | Price | |
|---|---|---|---|---|
| 1 | | McNett Black Witch Neoprene Adhesive by Other* | 12,04 | » View Offer |
| 2 |  | M2 Neoprenkleber inkl. Nahtband/Reparatur* | 17,90 | » View Offer |
| 3 |  | McNett T2769 AquaSure + FD 28 g Tube FLEXIBLE DURABLE ADHESIVE* | 15,28 12,81 | » View Offer |
*Price includes VAT, plus shipping. Customer reviews, prices, delivery times and costs may change in the meantime. By linking to selected online shops and partners, we may receive a small affiliate commission. There are no additional costs for you.
Add comment